KAYA Instruments’ IMX661 camera sets a new standard in imaging with 13400(H) x 9528(V) resolution, 46.2mm x 32.9mm pixel size (3.45µm x 3.45µm), 70.8dB dynamic range, and 9825e- full well charge. It boasts a global shutter, variable shutter speeds (down to 13.35µs), and electronic shutter controls for precise image capture. Video output features include 4 channels 12G CoaXPress, delivering up to 50 Gbps data transfer. Additional capabilities include continuous or triggered image acquisition, on-camera processing (LUT, defect pixel correction), and enhanced connectivity through GPIO, making it ideal for professional photography, industrial inspection, and scientific research.
Innovative Approach – The Iron661 is a low-cost, low-power, high resolution global CMOS camera with up to 50 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 127 MP high quality video, with 13400 (H) x 9528 (V) resolution, at rates of up to 22fps.
Intelligent Design – Iron661 incorporates a IMX661 global shutter sensor with 3.45µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.
Applications
Specifications
Feature | Description |
Pixel size | 3.45 µm x 3.45 µm |
Resolution | 13400 (H) x 9528 (V) |
Sensor size | 56.7 mm diagonal |
Sensor | Sony IMX661 |
Sensor Type | CMOS |
Output Interface | CoaXPress v2.1 |
Supported Interfaces | CXP-12, CXP-6 or CXP-3 |
Interface connector | x 4 Micro-BNC |
Output Resolution | 8 bit,10 bit, 12 bit or 14 bit |
Maximum Frame Rate | 21.5 fps @8 bit resolution |
21.5 fps @10 bit resolution | |
19.6 fps @12 bit resolution | |
12.9 fps @14 bit resolution | |
Tap Geometry | 1X-2YE |
Image Acquisition | Continuous / Triggered |
Camera Control | Gen<i>Cam |
Electronic shutter | Global shutter |
Monochrome / Color | Monochrome or Color |
Temporal Noise | <2.7 e- at 25°C |
Full Well Charge | 9825 e- |
Dynamic Range | >70.8 dB at 520 nm |
Signal-to-Noise Ratio (SNR max) | 40 dB at 520 nm |
Quantum Efficiency (QE) | >63% at 520 nm |
Shortest Exposure | 10 μs |
IR Filter (optional) | UV cut below 400 nm |
IR cut above 700 nm | |
Exposure control | Automatic/Manual |
Gain control | Automatic/Manual |
Color control | RGB offsets |
Auto / Manual White balance | |
LUT | |
Shutter speed | 13.35 µs |
Trigger input [1] | External, pulse generator, SW |
Trigger mode | Free run, externally or internally triggered |
Trigger options | Edge, de-bounce |
Subsampling | 1 x 2 / 2 x 1 / 2 x 2 (user configurable) |
Angular response | 15° (80% horizontal response) |
Regulation | FCC Part 15 Class A, CE, RoHs2 (official certification optional) |
On camera processing | Defect pixel correction |
LUT | |
Image enhancement | Defect pixel correction |
Gain (Analog / Digital) | |
Auto / Manual black level | |
Binning | |
Auto Exposure / Gain | |
Flat field / Fixed pattern noise correction | |
Additional on camera processing | ROI |
Image flip | |
Frame counter | |
Operational Time Counter | |
Binning | |
Power Input | PoCXP |
External 11 V – 28 V input | |
Power Consumption | <14 W at 24 V DC |
Configuration software | Gen<i>Cam Standard Software |
Synchronization | Protocol/External I/O Trigger |
Exposure Strobe output | Yes |
General Purpose Inputs and Outputs
I/O lines | 1 opto-isolated input |
1 opto-isolated output | |
1 singled-ended TTL output | |
1 singled-ended TTL/LVTTL input | |
Usage | Any System I/O input lines can be connected to any I/O output line |
Any I/O input line can generate any trigger event | |
Any I/O input line can trigger a timer | |
Any I/O input line can trigger a counter | |
Electrical specifications | TTL lines: 5 V TTL compliant |
LVTTL lines: 3.3 V LVTTL compliant | |
Isolated lines: opto-isolated lines with voltage range up to 30 V | |
Timers | 4 general purpose timers |
Configurable delay and duration | |
32-bit accumulator | |
Counters | 4 general purpose counters |
Configurable delay and duration | |
32-bit counter |
Mechanical
Dimensions (including lens mount)83 mm x 78 mm x 49 mm (Height x Width x Depth)
Weight (without lens or mount) | 500 g (17.6 oz) |
Lens Mount | M72 |
Sensor Alignment | Active |
Ingress Protection | Optional IP67 (with protective lens tube) |
Environmental Conditions
Operating ambient air temperature | Commercial : 0°C to +50°C ( 32°F to +122°F) |
Industrial : -40.0°C to +70°C ( -40°F to +158°F | |
Operating ambient air humidity | 10% to 90% RH non-condensing |
Operating ambient air temperature | Commercial : 0°C to +55°C ( 32°F to +131°F) |
Industrial : -40.0°C to +75°C ( -40°F to +167°F | |
Storage ambient air humidity | 10% to 90% RH non-condensing |
Operational Shock | Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G |
MTBF | 1,600,000 (Without fan) hrs @ 50C (Telecordia) |
Certifications
Electromagnetic – EMC standards | The European Council EMC Directive 2004/108/EC |
The Unites States FCC rule 47 CFR 15 | |
EMC – Emission | EN 55022:2010 Class B |
FCC 47 Part 15 Class B | |
EMC – Immunity | EN 55024:2010 Class B |
EN 61000-4-3 | |
EN 61000-4-4 | |
EN 61000-4-6 | |
Flammability | PCB compliant with UL 94 V-0 |
RoHS | Compliant with the European Union Directive 2011/65/EU (RoHS2) |
REACH | Compliant with the European Union Regulation No 1907/2006 |
WEEE | Must be disposed of separately from normal household waste and must be recycled according to local regulations |
* Performance is measured at full resolution, maximum bitness and the maximum frame rate for that bitness
** KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.
*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.
IMX661 Spectral Responses
IMX661 FPS Calculator |