Iron 2020BSI-UV
4 MP at 74 fps Rolling Shutter sensor. Small Form Factor CoaXPress 12G ruggedized UV camera
Features
Innovative Approach – The Iron 2020BSI is a high speed, low-cost, low-power rolling shutter CMOS camera with up to 12.5 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 4 MP high quality video at rates of up to 74fps.
Intelligent Design – Our camera incorporates Gpixel’s GSENSE2020BSI super sensitive sensor – a rolling shutter sensor with a 6.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities and compatible with UV applications.
The CoaXPress interface allows high-speed data transmission for digital imaging in machine vision applications, faster than other standards, such as Camera Link or GigE Vision. Our CoaXPress Iron robust cameras are ideally suited for industrial, defense, and aerospace machine vision systems. With dimensions of 44 x 44 x 51.8 mm, The Iron CoaXPress 2020BSI-UV ruggedized camera is designed to fit very small places. The wide range of operating temperatures, spanning from -40°C to 85°C, enables it to function under severe environmental conditions. The high resolution of 2048 x 2048 provides a sensitive high-quality video output at a high speed that would meet almost any need.
- 4 Megapixel up to 74 fps
- Up to 4W power at full rate
- Full image processing feature set
- Up to 12.5 Gbps CoaXPress interface
- C / CS / EF or DC Auto Iris mounts
- Full EMVA1288 report
- Full built-in self-test (BIT)
- Full built-in voltage testing
- Customization as per user requirements
- Wide temperature range
- Vibration resistant
Applications
- Perimeter vision
- 3D
- Low light surveillance
- Special Effects
- VR
- UV
Specifications
Specifications
| Pixel Size | 6.5 µm x 6.5 µm |
| Resolution | 2048 (H) x 2048 (V) |
| Sensor Size | 13.3 mm x 13.3 mm | 1.2” |
| Sensor | Gpixel GSENSE2020BSI |
| Video output | CoaXPress v2.0 up to 12.5 Gbps (CXP3, CXP6, CXP12) |
| Interface Connector | Micro-BNC |
| Digitization | Dual 11 bit, Dual 12 bit |
| Electronic shutter | Rolling shutter with global reset |
| Shutter speed | 4.62 µs @11-bit resolution in 6.6 µs steps (up to 16 sec) |
| 8.04 µs @12-bit resolution in 11.2 µs steps (up to 16 sec) | |
| Exposure control | Off / Internal / Auto |
| Image acquisition | Continuous / Triggered |
| Trigger input | Pulse generator / Software (12 µs latency, 8 ns jitter) |
| Trigger mode | Free run / Internal |
| Trigger options | Edge |
| Output resolution | 16bits HDR in API or 24bit RAW (2x 11 or 12 bit ADC) |
| Frame rate | 74 fps @ 11 bit |
| 43 fps @ 12 bit | |
| Subsampling | 1 x 2 / 2 x 1 / 2 x 2 (user configurable) |
| Monochrome/color | Monochrome |
| Full well charge | 54 ke- |
| Dynamic range | 88dB |
| Dark current | 42 e- pxl/sec @ 21 °C |
| Signal-to-Noise Ratio (SNR max) | 46 dB |
| Quantum efficiency (QE) X FF | <95% @550 nm |
| Temporal noise | 1.9 e- or 1.4 e- with reduced dynamic range |
| Latency | < 100 µs (on top of exposure time) |
| Communication latency | Gen<i>Cam – ~5 ms |
| Direct camera access – ~0.5 ms | |
| Regulation | FCC Part 15 Class A, CE, RoHs2 (official certification optional) |
| On camera processing | Defect pixel correction |
| Auto/Manual White balance | |
| ROI | |
| Image flip | |
| Frame counter | |
| Flat field / Fixed patter noise correction | |
| LUT | |
| Gain (Analog / Digital) – manual / auto | |
| Auto/Manual black level | |
| Digital binning (2 x 2) | |
| Auto Exposure/Gain | |
| Operational Time Counter | |
| Pulse generator | Yes, Programmable at 8 ns increments |
| Additional features | Over/under voltage protection |
| Correlated double sampling support | |
| Per frame ROI change | |
| Global reset | |
| Multi ROI Support (vertical only. Horizontal at full resolution) | |
| Reverse voltage polarity protection | |
| Frame-by-frame shutter speed change | |
| Three points of temperature sensing | |
| Per-pixel FPN (optional) | |
| GPIO connection | Two inputs, two outputs, external trigger & strobe controller |
Mechanical & Electrical
| Dimensions (including lens mount) | 44 mm x 44 mm x 51.8 mm (Height x Width x Depth) |
| Lens Mount | C-mount, CS-mount, EF-mount or DC Auto Iris lenses |
| Weight (without lens) | <100g |
| Typical current | 170mA @ 24V |
| Power Consumption | <4W @ 24V DC |
| Mount | Front mount |
| Heat dissipation | Front heat dissipation |
| Sensor Mechanical Positioning | ≤ 0.15° |
| Operating temperature | -40°C to 85°C, 10-90% humidity (non-condensing) |
| Storage temperature | -40°C to 90°C, 10-90% humidity (non-condensing) |
| Shock/Vibration | MIL 810F |
* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.
Camera Workflow
*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.
QE Tables
Gsense2020bsi camera spectral response
Gallery
 |
 |
 |
 |
 |
Related
Iron CoF 2020BSI
The Iron 2020BSI is a high-speed, low-cost, low-power global shutter CMOS camera with a CoaXPress over Fiber Bridge 1.0 interface (via a SFP+ module) which supports 4 MP high quality video at rates of up to 74fps.
Iron CoF 2020BSI-UV
The Iron 2020BSI-UV is a high-speed, low-cost, low-power global shutter CMOS camera with a CoaXPress over Fiber Bridge 1.0 interface (via a SFP+ module) which supports 4 MP high quality video at rates of up to 74fps.