Iron 3265

65 MP at 71 fps Global Shutter sensor. Small Form Factor CoaXPress 12G ruggedized camera

Features

Innovative Approach – The Iron 3265 is a low-cost, low-power, high-resolution global CMOS camera with up to 50 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 65 MP high-quality video at rates of up to 71fps.

Intelligent Design – The GMAX3265 is a global shutter sensor with a 3.2μm pixel size. With a compact outlinethe cameracan be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

The CoaXPress interface allows high-speed data transmission for digital imaging in machine vision applications, faster than other standards, such as Camera Link or GigE Vision. Our CoaXPress Iron robust cameras are ideally suited for industrial, defense, and aerospace machine vision systems. With dimensions of 62 x 62 x 44.4 mm, The Iron CoaXPress 3265 ruggedized camera is designed to fit very small places. The wide range of operating temperatures, spanning from -40°C to 70°C, enables it to function under severe environmental conditions. The high resolution of 9344 x 7000 provides a sensitive high-quality video output at a high speed that would meet almost any need.

  • 65 Megapixel up to 71 fps
  • Up to 9W power at full rate
  • Full image processing feature set
  • Pan/Tilt alignment of the sensor
  • Up to 50 Gbps CoaXPress interface
  • F, EF, Birger EF or M42-mount
  • Full EMVA1288 report
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Wide temperature range
  • Vibration resistant

Applications

  • Perimeter vision
  • 3D
  • Low light surveillance
  • Special Effects
  • VR

Specifications

Specifications

Pixel Size 3.2 µm x 3.2 µm
Resolution 9344 (H) x 7000 (V)
Sensor Size 29.9 mm x 22.4 mm | 7/3”
Sensor Gpixel GMAX3265
Video output x 4 channels CoaXPress v2.0 up to 50 (12.5 x 4) Gbps (CXP3, CXP6, CXP12)
Interface Connector * x 4 Micro-BNC
Digitization 10 bit, 12 bit
Electronic shutter Global shutter
Shutter speed 13.35 µs
Exposure control Off / Internal / Auto
Image acquisition Continuous / Triggered
Trigger input External, pulse generator, SW
Trigger mode Free run, externally or internally triggered
Trigger options Edge, de-bounce
Output resolution 8 bit, 10 bit, 12 bit
Frame rate HS model:        71 fps @8 bit
                          58 fps @10 bit
NS model:        31 fps @8 bit
                           31 fps @10 bit
                           31 fps @12 bit
Subsampling 1 x 2 / 2 x 1 / 2 x 2 (user configurable)
Monochrome/color Monochrome / color
Full well charge 10.9 ke- @ PGA gain x0.75
Dynamic range 65.0dB @ PGA gain x1.25
Dark current 5.3 e- pxl/sec @40°C
Quantum efficiency (QE) X FF <65.3% @500 nm (according to sensor performance)
Temporal noise 2.3 e- @ PGA gain x6
Angular response 15° (80% response)
Regulation FCC Part 15 Class A, CE, RoHs2 (official certification optional)
On camera processing Defect pixel correction
Digital binning (2 x 2)
ROI
Auto Exposure/Gain
LUT
Gain (Analog / Digital) – manual / auto
Auto/Manual black level
Image H/V flip
Pulse generator Yes, Programmable at 8 ns increments
Additional features Over/under voltage protection
Three points of temperature sensing
Per-pixel FPN (optional)
Reverse voltage polarity protection
Frame-by-frame shutter speed change
Global reset
GPIO connection Two inputs, two outputs, external trigger & strobe controller


Mechanical & Electrical

Dimensions (w/o lens mount) 62 mm x 62 mm x 44.4 mm (Height x Width x Depth)
Lens Mount F-Mount, Canon EF-mount, Birger EF-mount or M42-mount
Weight (without lens) 450g
Typical current 375mA @ 24V
Power input PoCXP full support (10-28V with external power option)
Power Consumption <9W @ 24V DC
Mount Front mount
Heat dissipation Active airflow (Fan), optional TEC cooling
Sensor Mechanical Positioning ≤ 0.15°
Operating temperature Commercial: 0°C to 50°C, 20-85% humidity (non-condensing)
Industrial: -40°C to 70°C, 20-85% humidity (non-condensing)
Storage temperature Commercial: 0°C to 55°C, 20-85% humidity (non-condensing)
Industrial: -40°C to 75°C, 20-85% humidity (non-condensing)
Shock/Vibration MIL 810F
  • The Iron 3265 should be used with a 4-channel 12G CoaXPress frame grabber card for maximum performance.
  •  The output can be synchronized to the trigger on a frame by frame basis
  •  MIL 810F is only available for the Industrial\Rugged model and is not available in the commercial versionv
  • Performance is measured at full resolution, maximum bitness and the maximum frame rate for that bitness
  • KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.

 

Camera Workflow

Iron CoaXPress camera work flow with Frame Grabber

Iron CoaXPress camera work flow with Frame Grabber

*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.

QE Tables

GMAX3265 Spectral Response

FPS Calculator

Gpixel GMAX3265 FPS Calculator

Gallery