Komodo FXP CoaXPress over Fiber acquisition system

Key Features:

Up to 8 CoaXPress 6.25Gbps channels
Up to 80km maximum distance
PCIe Gen3 x8 interface
144 Gbps DDR3 memory
PoCXP support on all channels
On board image processing (DeBayer, Color correction and many more)
Flexible GPIO interface
Sophisticated GUI and SDK support
Plug and Play
Extended temperature range (optional)
JIIA certified product

Ordering Codes:

KY-FXP

Komodo FXP – CoaXPress over Fiber acquisition system

$0.00

Category: Uncategorized

Features

Komodo FXP system is the industry first CoaXPress image acquisition system without range limitations. The system uses fiber optic cables to provide high resolution image acquisition interface for distances up to 80km in single-mode and up to 300m in multi-mode. The Komodo FXP system is capable of receiving video streams from up to 4 CoaXPress links in single, dual or quad modes. It is used for simultaneous capture from up to four cameras. Each link supports standard CoaXPress bitrates up to 6.25 Gbps. This system is ideally suited for industrial, defense and aerospace Machine Vision Systems and applications. The system consists of Komodo Fiber frame grabber and CoaXPress to Fiber device. The remote unit converts CoaXPress links to fiber optic interface. The Komodo Fiber FXP system uses a high performance flow through DMA to transmit video streams to computer memory through PCIe interface with minimal latency. This product also provides GPIO for machine control signals, such as triggers, shaft encoders, exposure control and general I/O, which can be control aside video stream acquisition.
The Frame Grabber utilizes PCIe Gen3 x8 links for communication with Host PC for video uploading and configuration.

Specifications

Solves distance limitation of CoaXPress
Extention for distances up to 80km in single-mode and up to 300m in multi-mode
Plug and Play , no need to configure
1 to 4 CoaXPress links support
PCIe Gen3 x8 Half-length card
Up to 144 Gb image buffer
Multi-stream support
Camera controls and triggers
Per-link LED indication on card bracket
Flexible machine I/O:
- 4 TTL configurable I/Os
- 4 LVCMOS configurable I/Os
- 2 LVDS inputs
- 2 LVDS outputs
- 4 opto-isolated outputs
- 4 opto-isolated inputs
- 8 quadrature rotary encoders
- Integrated strobe controller
CoaXPress V1.1 compliant
Power over CoaXPress with 13W per link
Multiple Camera synchronization
Multiple Frame Grabbers synchronization
DIN 1.0/2.3 connectors for CoaXPress links
GUI interface
Supporting Windows and Linux OS
API for developing custom applications
Plug-ins modules for Matlab, HALCON and Labview
GenICam compliant
GenTL support
Data rates up to 6.25 Gbps per link
Transfer Rate of up to 60 Gbps
0°C to 50°C operating environment temperature

On board processing

LUT operators with selectable bit depth
RGB and Bayer with selectable bit depth
Tap re-ordering
H/V flipping
Custom processing engines

Deliverables

Komodo Fiber Frame Grabber
CoaXPress to Fiber Adapter
SFP+/QSFP+ modules (optional)
Power supply (optional)
Hardware user manual
Software installation and documentation (Disk-on-Key)
CoaXPress cables (optional)
Fiber Cables (optional)
GPIO Extension Panel (optional)

Block diagram

Example System Block Diagram

The Komodo FXP acquisition system supports multiple modes of configuration and system topology. Few of these are presented in following diagrams.

Single Camera Topology: Single, Dual or Quad CoaXPress links with up to 6.25 Gb per link topology. Maximum throughput to PCIe of 55 Gb/sec.
Dual Camera Topology: Single or Dual CoaXPress links per camera with up to 6.25 Gb per link topology. Maximum throughput to PCIe of 55 Gb/sec.
Single Camera QSFP+ Topology: Single, Dual or Quad CoaXPress links with up to 6.25 Gb per link topology. Maximum throughput to PCIe of 55 Gb/sec.
Dual Camera QSFP+ Topology: Single, Dual or Quad CoaXPress links per camera, with up to 6.25 Gb per link topology. Maximum throughput to PCIe of 55 Gb/sec.