Komodo II CoaXPress 12G PCIe/104 Frame Grabber

Key Features:

1 to 4 CoaXPress links support
PCie 3.0 (Gen 3) x8 bus
2GB DDR4 frame buffer
Flexible GPIO interface
CoaXPress v2.1 compliant
Power over CoaXPress with 13W per link
GUI Interface
Supporting Windows and Linux OS
API for custom application development
Plug-in modules for Matlab, HALCON, Cognex
and Labview
Gen<i>Cam compliant

Ordering Code:

KY-FGK-II-104

Komodo-II-CoaXPress-12G-PCIe104 - featured image

Komodo II CoaXPress 12G PCIe/104 Frame Grabber

$2,250.00

Category: Uncategorized

Features

Komodo II CoaXPress 12G PCIe/104 is the best in class Frame Grabber, supporting the CoaXPress v2.1 standard. It can receive video streams from up to 4 CoaXPress links in single, dual or quad modes. It can also be used for simultaneous capture from multiple cameras. Each link supports standard CoaXPress bitrates of up to 12.5 Gbps.

The frame grabber utilizes PCIe/104 compact standard. It is rugged, reliable and the four-corner mounting holes make it particularly resistant to shock and vibrations. These features make the Komodo II CoaXPress 12G PCIe/104 ideally suited for industrial, defense and aerospace Machine Vision Systems and applications.

The Komodo II CoaXPress 12G PCIe/104 can easily receive video streams on the CoaXPress links and transmit them to computer memory through the PCIe interface. This product also provides an external GPIO for machine control signals, such as triggers, timers, shaft encoders, exposure control and general I/O which can be controlled aside video stream acquisition. Our frame grabber uses standard Micro-BNC connectors as a CoaXPress interface to the camera. It utilizes PCIe Gen3 x8 links for communication with Host PC for video uploading and configuration.

Specifications

Product / Feature	Komodo II CoaXPress 12G PCIe/104 Frame Grabber
Format	For insertion in a standard height, 8-lane or higher, PCI Express card slot
Cooling method	Conduction cooling
Mounting	For insertion in a standard height, 8-lane or higher, PCI Express card slot
Connectors	- Ports 0 through 3 via x4 extended Micro-BNC female connectors cables - x1 External I/O connectoronseparate PCB:HD-DB26 D-sub panel mount (26-pin 3-row,through hole, right angle)PoCXP camera(s)
Dimensions	L 95.89 mm x H 90.17 mm L 3.775 in x H 3.55 in
Weight	225gr
Host bus
Standard	PCI Express 3.0
Link width	8 lanes 1, 2 or 4 lanes with reduced performance
Link speed	• 8.0 GT/s (PCIe 3.0) • 5.0 GT/s (PCIe 2.0) with reduced performance
Maximum payload size	512 bytes
DMA	• 64-bit • Scatter gather support • Physical address support (GPU transfers)
Peak delivery bandwidth	7,880 MB/s
Effective (sustained) delivery bandwidth	6,710 MB/s (Host PC motherboard dependent)
Power consumption	Typ. 16.8 W (3.8 W @ +3.3V, 13 W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s)	CoaXPress v2.1 (CoaXPress 1.1 backward compatible)
Status LEDs	1 bicolor status LED per connector 4 System status LEDs
Number of cameras	Up to 4
Number of links per single camera	Up to 4
Syncronisation between cameras	Yes
Line-scan cameras supported	Yes
Maximum aggregated camera data transfer rate	50 Gbit/s
Supported CXP down-connection speeds	• 1.25 GT/s (CXP-1) • 2.5 GT/s (CXP-2) • 3.125 GT/s (CXP-3) • 5 GT/s (CXP-5) • 6.25 GT/s (CXP-6) • 10 GT/s (CXP-10) • 12.5 GT/s (CXP-12)
Number of data streams (per camera)	1 data stream per camera
Maximum stream packet size	8,192 bytes
Camera types	• Area-scan cameras: - Gray-scale and color (RGB and Bayer CFA) - Single-tap (1X-1Y) progressive-scan • Line-scan cameras: - Gray-scale and color RGB
Camera pixel formats supported	Raw, Monochrome, Bayer, RGB, YUV, YCbCr and RGBA (PFNC names): - Raw - Mono8, Mono10, Mono12, Mono14, Mono16 - BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG - RGB8, RGB10, RGB12, RGB14, RGB16 - RGBA8, RGBA10, RGBA12, RGBA14, RGBA16 - YUV411_8, YUV411_10, YUV411_12, YUV411_14, YUV411_16 - YUV422_8, YUV422_10, YUV422_12, YUV422_14, YUV422_16 - YUV444_8, YUV444_10, YUV444_12, YUV444_14, YUV444_16 - YCbCr601_411_8, YCbCr601_411_10, YCbCr601_411_12, YCbCr601_411_14, YCbCr601_411_16 - YCbCr601_422_8, YCbCr601_422_10, YCbCr601_422_12, YCbCr601_422_14, YCbCr601_422_16 - YCbCr601_444_8, YCbCr601_444_10, YCbCr601_444_12, YCbCr601_444_14, YCbCr601_444_16
Area-scan camera control
Trigger	Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of triggering from encoder or timer Support of external hardware trigger, with optional delay, filtering and trigger decimation.
Strobe	Accurate control of the strobe position for strobe light sources. Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger	Precise control of start-of-scan and end-of-scan triggers. Support of external hardware trigger, with optional delay and filtering. Support of triggering from encoder Support of infinite acquisition, without missing lines.
Line trigger	Support for quadrature motion encoders, with programmable filters, selection of acquisition direction and backward motion compensation.
Line strobe	Accurate control of the strobe position for strobe light sources.
On-board processing
On-board memory	2GByte DDR4
Bayer De-Mosaic	Full 16bit resolution • Bilinear 3x3 • Bilinear 3x2 for linescan with gradient correction
Color Transformation	Full 16bit resolution 18bit coefficiens table • Color space conversion • Gain and Offset
Decimation	Line skip
Additional features	Unpacking of 10-/12-/14-bit to 16-bit with justification to LSB
Frame Timestamp	64bit with 8ns precision
Data stream statistics	Measurement of: • Frame/Line rate • CRC Errors • Dropped frames • Received packets • Test packets
Event signaling and counting	The application software can be notified of the occurrence of various events: - Newly acquired buffers - Camera and Illumination control events - I/O events - Timer events - Encoder events
General Purpose Inputs and Outputs
Number of lines	20 I/O lines: -2 differential inputs -2 differential outputs -4 singled-ended TTL inputs/outputs -4 singled-ended LVTTL inputs/outputs -4 opto-isolated inputs -4 opto-isolated outputs
Usage	Any System I/O input lines can be connected to any I/O line, Any I/O line can be used to decode A/B and Z signals of a motion encoder, Any I/O line can generate any trigger event, Any I/O line can trigger a timer
Electrical specifications	Differential lines - LVDS compatible TTL lines: 5V TTL compliant LVTTL lines: 3.3V LVTTL compliant Isolated lines: opto-isolated lines with voltage range up to 30V
Filter control	Glitch removal filter available on all System I/O input lines Configurable filter time constants: - for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs - for IN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control	Yes
Encoders	4 quadrature encoders with A/B and Z inputs 32bit position counter Forward and backward counting Position trigger support Noise filtering
Timers	4 general purpose timers Configurable delay and duration 32bit accumulator
Event reporting	64-bit system timestamp event reporting Each I/O line can generate event on configurable edge Each Timer can generate event Each encoder can generate event
Frame grabber syncronisation
Syncronisation	Precise area and line-scan cameras synchronization across different frame grabbers
Software
Host PC Operating System	Microsoft Windows 10 64-bit versions Open source Linux kernel driver Tested and precompiled for Ubuntu 18.04, RedHat 7.x, CentOS 7.x 64-bit versions Nvidia Xavier AGX (with an optional adapter card)
Buffer management	Circular buffer support Accumulation of several frames/lines to single buffer to reduce CPU load CPU load DMA Buffer filling directly to system memory
APIs	GenCam, GenTL producer libraries, C/C++, Python and NET bindings Compilers: x86_64 dynamic library designed to be used with ISO-compliant C runtime Allows for development of x86_64 applications Plug-in modules for Matlab, HALCON, Cognex and Labview
GUI	Supported for Windows and Linux OS Multi camera display and configuration Flexible buffer queuing Image/video recording and playback
Debugging capabilities	Event logging Statistics counters
GenCam	Supports GenICam 3.2 Full camera and Frame Grabber parameters configuration
Environmental conditions
Operating ambient air temperature	-40°C to +85°C / -40°F to +185 °F
Operating ambient air humidity	10% to 90% RH non-condensing
Storage ambient air temperature	-60°C to +90°C / -76°F to +194°F
Storage ambient air humidity	10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards	The European Council EMC Directive 2004/108/EC The Unites States FCC rule 47 CFR 15
EMC - Emission	EN 55022:2010 Class B FCC 47 Part 15 Class B
EMC - Immunity	EN 55024:2010 Class B EN 61000-4-3 EN 61000-4-4 EN 61000-4-6
Flammability	PCB compliant with UL 94 V-0
RoHS	Compliant with the European Union Directive 2011/65/EU (RoHS2)
REACH	Compliant with the European Union Regulation No 1907/2006
WEEE	Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information	KY-FGK-II-104
Optional accessories	CoaXPress cables