Back Side Illuminated, 14.2 Megapixel, Global shutter, Small, Rugged, Low Power with Large Feature Set Innovative
Key Features:
• 14.2 Megapixel up to 275.0 fps
• Color, Monochrome, and UV Enhanced
• Up to 11 W power at full rate
• Full image processing feature set
• CoaXPress v2.1 standard compliant
• Gen<i>Cam compliant
• Up to 4 CoaXPress links
• F, M42, EF or Active EF lens mounts available
• Commercial and Industrial grade options
• Full EMVA1288 report
• Full built-in self-test (BIT)
• Full built-in voltage testing
• Customization as per user requirements
Applications:
• Perimeter vision
• Low light surveillance
• Special Effects
• Virtual Reality
• 3D
Innovative Approach
Iron 5514 BSI CoaXPress is an ultra-thin, high-speed, low-cost, low-power Global shutter CMOS camera with a Micro-BNC interface. It supports 14.2 Megapixel high-quality video at rates up to 275.0 fps.
Intelligent Design
With an extremely compact form factor, the Iron 5514 BSI CoaXPress fits into small spaces. Its superior sensor performance provides high-quality images with great dynamic range, low noise, and excellent low-light vision capabilities.
General | |
---|---|
Pixel Size | 5.5 μm x 5.5 μm |
Resolution | 4608 (H) x 3072 (V) |
Sensor Size | 30.5 mm diagonal |
Sensor Format | 1.2” |
Sensor | Gpixel GSPRINT5514BSI |
Sensor Type | CMOS |
Output Interface | CoaXPress v2.1 |
Supported Interface Rates | CXP-12, CXP-6, CXP-3 |
Interface Connector | Micro-BNC |
Number of Connectors | 4 |
Output Resolution | 10, 12, or 24 bit |
Maximum Frame Rate | 275 fps @10 bit resolution 229 fps @12 bit resolution 81 fps @24 bit resolution |
Tap Geometry | 1X-2YE |
Image Acquisition | Continuous / Triggered |
Camera Control | Gen<i>Cam |
Electronic Shutter | Global |
Monochrome / Color | Monochrome or UV Enhanced |
Temporal Noise | <2.0 e- at 25°C |
Full Well Charge | 15000 e- |
Dynamic Range | >77.5 dB at 520 nm |
Signal-to-Noise Ratio (SNR max) | 40 dB at 520 nm |
Quantum Efficiency (QE) | >85% at 520 nm |
Shortest Exposure | 2.5 μs |
IR Filter (optional) | UV cut below 400 nm IR cut above 700 nm |
Exposure Control | Automatic/Manual |
Gain Control | Automatic/Manual |
Color Control | RGB offsets Auto / Manual White balance LUT |
Image Enhancement | Defect pixel correction Gain (Analog / Digital) Auto / Manual black level Binning Auto Exposure / Gain Flat field / Fixed pattern noise correction |
Additional On-Camera Processing | ROI Image flip Frame counter Operational Time Counter Binning |
Power Input | PoCXP External 10 V – 28 V input |
Power Consumption | <11 W at 24 V DC |
Configuration Software | Gen<i>Cam Standard software |
Synchronization Protocol/External I/O | Trigger |
Exposure Strobe Output | Yes |
General Purpose Inputs and Outputs | |
---|---|
I/O Lines | – 1 opto-isolated input – 1 opto-isolated output – 1 single-ended TTL output – 1 single-ended TTL/LVTTL input |
Usage | – Any System I/O input lines can be connected to any I/O output line – Any I/O input line can generate any trigger event – Any I/O input line can trigger a timer – Any I/O input line can trigger a counter |
Electrical Specifications | – TTL lines: 5 V TTL compliant – LVTTL lines: 3.3 V LVTTL compliant – Isolated lines: opto-isolated lines with voltage range up to 30 V |
Timers | – 4 general purpose timers – Configurable delay and duration – 32-bit accumulator |
Counters | – 4 general purpose counters – Configurable value and duration – 32-bit counter |
Mechanical | |
Dimensions (including lens mount) | 75 mm x 75 mm x 44.4 mm (3.0” x 3.0” x 1.7”) |
Weight (without lens) | 450 g (15.9 oz) |
Lens Mount | F, M42, EF or Active EF |
Sensor Alignment | Active |
Ingress Protection | Optional IP67 (with protective lens tube) |
Environmental Conditions | |
Operating Ambient Air Temperature | – Commercial: 0°C to +50°C (32°F to +122°F) – Industrial: -40°C to +80°C (-40°F to +176°F) |
Operating Ambient Air Humidity | 10% to 90% RH non-condensing |
Storage Ambient Air Temperature | – Commercial: 0°C to +55°C (32°F to +131°F) – Industrial: -40°C to +85°C (-40°F to +185°F) |
Storage Ambient Air Humidity | 10% to 90% RH non-condensing |
Operational Shock | Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G |
Operational Vibration | Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20 |
MTBF | 2,100,000 hrs @ 50°C (Telecordia) |
Certifications | |
Electromagnetic – EMC Standards | – The European Council EMC Directive 2004/108/EC – The United States FCC rule 47 CFR 15 |
EMC – Emission | – EN 55022:2010 Class B – FCC 47 Part 15 Class B |
EMC – Immunity | – EN 55024:2010 Class B – EN 61000-4-3 – EN 61000-4-4 – EN 61000-4-6 |
Flammability | PCB compliant with UL 94 V-0 |
RoHS | Compliant with the European Union Directive 2011/65/EU (RoHS2) |
REACH | Compliant with the European Union Regulation No 1907/2006 |
WEEE | Must be disposed of separately from normal household waste and recycled according to local regulations |
*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.