Iron 462

1080p video at 60 fps Rolling Shutter Sensor. Small Form Factor, CoaXPress Ruggedized Camera

Features

Innovative Approach – The Iron CXP 462 is an ultra-thin, low-cost, low-power rolling shutter CMOS camera with a CoaXPress v2.0 interface (Micro-BNC connector) that supports high-quality video.

Intelligent Design – Our camera incorporates high sensitivity Sony rolling shutter sensor with a 2.9µm pixel size. With an extremely compact outline, the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

The CoaXPress interface allows high-speed data transmission for digital imaging in machine vision applications, faster than other standards, such as Camera Link or GigE Vision. Our CoaXPress Iron robust cameras are ideally suited for industrial, defence, and aerospace machine vision systems. With dimensions of 44 x 43x 32 mm, The Iron CoaXPress 462 ruggedized camera is designed to fit very small places. The wide range of operating temperatures, spanning from -40°C to 80°C, enables it to function under severe environmental conditions. The high resolution provides a sensitive high-quality video output at a high speed that would meet almost any need.

  • Maximal frame rate of up to 60 fps
  • Up to 2.2W power at full rate
  • Full image processing feature set
  • C lens mount
  • Rugged industrial grade
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Board level and packaged camera options
  • Wide temperature range
  • Vibration resistant

Applications

  • Perimeter vision
  • Low light surveillance
  • Special Effects
  • Virtual Reality
  • 3D

Specifications

Specifications

General
Pixel Size 2.9 µm x 2.9 µm
Resolution 1920 (H) x 1080 (V)
Sensor Size 6.4 mm diagonal
Sensor Sony Starvis IMX462
Sensor Type CMOS
Output Interface CoaXPress v2.1
Supported Interface rates CXP-6 or CXP-3
Interface Connector Micro-BNC
Number of Connectors 1
Output Resolution 8, 10 or 12 bit
Maximum Frame Rate •120 fps @8 bit resolution
•120 fps @10 bit resolution
•60 fps @12 bit resolution
Tap Geometry 1X-1Y
Image Acquisition Continuous / Triggered
Camera Control Gen<i>Cam
Electronic Shutter Rolling
Monochrome / Color Color
Temporal Noise <2.8 e- at 25°C
Full Well Charge 10500 e-
Dynamic Range >72 dB at 520 nm
Signal-to-Noise Ratio (SNR max) 42 dB at 520 nm
Quantum Efficiency (QE) >80% at 520 nm
Shortest Exposure 14 µs
IR Filter (optional) •UV cut below 400 nm
•IR cut above 700 nm
Exposure control Automatic/Manual
Gain control Automatic/Manual
Color Control •RGB offsets
•Auto / Manual White balance
•LUT
Image enhancement •Defect pixel correction
•Gain (Analog / Digital)
•Auto / Manual black level
•Binning
•Auto Exposure / Gain
•Flat field / Fixed pattern noise correction
Additional on camera processing •ROI
•Image flip
•Frame counter
•Operational Time Counter
•Binning
Power Input •PoCXP
•External 5 V – 28 V input
Power Consumption <2.2 W at 24 V DC
Configuration software GenCam Standard software
Synchronization Protocol/External I/O Trigger
Exposure Strobe output Yes
General Purpose Inputs and Outputs
I/O lines •2 singled-ended LVTTL input/output
Usage •Any System I/O input lines can be connected to any I/O output line
•Any I/O input line can generate any trigger event
•Any I/O input line can trigger a timer
•Any I/O input line can trigger a counter
Electrical specifications •TTL lines: 5 V TTL compliant
•LVTTL lines: 3.3 V LVTTL compliant
•Isolated lines: opto-isolated lines with voltage range up to 30 V
Timers •4 general purpose timers
•Configurable delay and duration
•32-bit accumulator
Counters •4 general purpose counters
•Configurable value and duration
•32-bit counter
Mechanical
Dimensions (including lens mount) 44 mm x 44 mm x 34.82 mm (1.7” x 1.7” x 1.4”)
Weight (without lens) 50 g (1.8 oz)
Lens Mount C
Sensor Alignment Active
Ingress Protection Optional IP67 (with protective lens tube)
Environmental Conditions
Operating ambient air temperature Commercial : 0°C to +50°C ( 32°F to +122°F)
Industrial : -40.0°C to +80°C ( -40°F to +176°F)
Operating ambient air humidity 10% to 90% RH non-condensing
Storage ambient air temperature Commercial : 0°C to +55°C ( 32°F to +131°F)
Industrial : -40.0°C to +85°C ( -40°F to +185°F)
Storage ambient air humidity 10% to 90% RH non-condensing
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20
MTBF 2,100,000 hrs @ 50C (Telecordia)

* KAYA Instruments reserves the right to update the datasheet from time to time without prior notice.

Camera Workflow

*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.

QE Tables

IMX462 Color Spectral Response

Gallery