Bluetooth Wireless Adapter

Features

  • Supports Bluetooth Low Energy 5 (BLE)
  • Wireless connection
  • Compatible with iOS and Android
  • Can be powered by 5-40 V
  • Communication range up to 50m (line-of-sight)
  • LED control lights

KAYA’s Bluetooth wireless adapter is designed to communicate with the IRON SDI camera line. The KAYA Bluetooth adapter will communicate to the camera with Bluetooth Low Energy enabled devices such as iOS or Android. KAYA provides an easy-to-use application SDI Control Point via App Store and Google Play which will discover local cameras and enable camera control to create, change or save camera parameters. KAYA’s Bluetooth wireless adapter allows the user to modify parameters of the cameras while in use in difficult to reach locations. The KAYA Bluetooth wireless adapter has a maximum communication range of up to 50 meters (160 ft) which is great a wide range of applications including television, film production, broadcast, surveillance, security and machine vision.

 

Specifications

Technical Data

Operating systems iOS 13 and later, Android 9 and later
Interface type RS232
Baud Rates 115200
Parity None, even
Stop bits 1
Data bits 8
Flow control None, CTS/RTS
LED lights TX, RX, Bluetooth and Power
RS232 Signals TX, RX, CTS, RTS, GND
Serial port 1-port male D-sub 9-pin
Bluetooth version Version 5
Frequency range 2.4 GHz ISM (2.40000 – 2.4835GHz)
TX Power Max. 4 dBm
RX Sensitivity -96 dBm typical
TX current consumption 16.6 mA (radio only, 4 dbm)
Antenna External
Antenna Gain max. 2 dB
Power supply Mini USB, screw terminals or DB9 pin 9: 5-40 VDC
Max comm range Up to 160 feet (50m) in open space and ideal conditions
Operating temperature -40 °C to 85 °C / -40 °F to 185 °F
Dimensions 87 mm x 34 mm x 18 mm
Certifications CE, FCC, RoHs
Accessories Mini USB cable

Power supply

KAYA’s Bluetooth wireless adapter can be powered by:

  • Mini USB (5 VDC)
  • Screw terminals (5 – 40 VDC)

Do NOT power the adapter by more than one source!

Do NOT exceed 40 VDC

Bluetooth Wireless Adapter

Settings

KAYA’s Bluetooth wireless adapter already preconfigured to work with KAYA SDI cameras and does not require additional configuration.

The device can be configured manually by setting the DIP switches on the rear panel according to figure below:

Contact us