Iron 2020BSI

4MP at 74 fps Rolling Shutter sensor. High speed, low-cost, low-power CoaXPress Ruggedized Camera

Features

  • 4 Megapixel up to 74 fps
  • Up to 4W power at full rate
  • Full image processing feature set
  • Up to 12.5 Gbps CoaXPress interface
  • C / CS / EF or DC Auto Iris mounts
  • Full EMVA1288 report
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Wide temperature range
  • Vibration resistant
  • Perimeter vision
  • 3D
  • Low light surveillance
  • Special Effects
  • VR
  • UV

Innovative Approach – The Iron 2020BSI is a high speed, low-cost, low-power rolling shutter CMOS camera with up to 12.5 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 4 MP high quality video at rates of up to 74fps.

Intelligent Design – Our camera incorporates Gpixel’s GSENSE2020BSI super sensitive sensor – a rolling shutter sensor with a 6.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities and compatible with UV applications.

Specifications

Pixel Size 6.5 µm x 6.5 µm
Resolution 2048 (H) x 2048 (V)
Sensor Size 13.3 mm x 13.3 mm | 1.2”
Sensor Gpixel GSENSE2020BSI
Video output CoaXPress v2.0 up to 12.5 Gbps (CXP3, CXP6, CXP12)
Interface Connector Micro-BNC
Digitization Dual 11 bit, Dual 12 bit
Electronic shutter Rolling shutter with global reset
Shutter speed 4.62 µs @11-bit resolution in 6.6 µs steps (up to 16 sec)
8.04 µs @12-bit resolution in 11.2 µs steps (up to 16 sec)
Exposure control Off / Internal / Auto
Image acquisition Continuous / Triggered
Trigger input Pulse generator / Software (12 µs latency, 8 ns jitter)
Trigger mode Free run / Internal
Trigger options Edge
Output resolution 16bits HDR in API or 24bit RAW (2x 11 or 12 bit ADC)
Frame rate 74 fps @ 11 bit
43 fps @ 12 bit
Subsampling 1 x 2 / 2 x 1 / 2 x 2 (user configurable)
Monochrome/color Monochrome
Full well charge 54 ke-
Dynamic range 88dB
Dark current 42 e- pxl/sec @ 21 °C
Signal-to-Noise Ratio (SNR max) 46 dB
Quantum efficiency (QE) X FF <95% @550 nm
Temporal noise 1.9 e- or 1.4 e- with reduced dynamic range
Latency < 100 µs (on top of exposure time)
Communication latency Gen<i>Cam – ~5 ms
Direct camera access – ~0.5 ms
Regulation FCC Part 15 Class A, CE, RoHs2 (official certification optional)
On camera processing Defect pixel correction
Auto/Manual White balance
ROI
Image flip
Frame counter
Flat field / Fixed patter noise correction
LUT
Gain (Analog / Digital) – manual / auto
Auto/Manual black level
Digital binning (2 x 2)
Auto Exposure/Gain
Operational Time Counter
Pulse generator Yes, Programmable at 8 ns increments
Additional features Over/under voltage protection
Correlated double sampling support
Per frame ROI change
Global reset
Multi ROI Support (vertical only. Horizontal at full resolution)
Reverse voltage polarity protection
Frame-by-frame shutter speed change
Three points of temperature sensing
Per-pixel FPN (optional)
GPIO connection Two inputs, two outputs, external trigger & strobe controller


Mechanical & Electrical

Dimensions (including lens mount) 44 mm x 44 mm x 51.8 mm (Height x Width x Depth)
Lens Mount C-mount, CS-mount, EF-mount or DC Auto Iris lenses
Weight (without lens) <100g
Typical current 170mA @ 24V
Power Consumption <4W @ 24V DC
Mount Front mount
Heat dissipation Front heat dissipation
Sensor Mechanical Positioning ≤ 0.15°
Operating temperature -40°C to 85°C, 10-90% humidity (non-condensing)
Storage temperature -40°C to 90°C, 10-90% humidity (non-condensing)
Shock/Vibration MIL 810F

* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.

Camera Workflow

*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.

QE Table

Gsense2020bsi camera spectral response

Gsense2020bsi camera spectral response

Gallery

Iron 2020BSI
Iron 2020BSI
Iron 2020BSI
Iron 2020BSI