Iron SDI 265

1080p at 60fps Global Shutter sensor. Small Form Factor SDI (up to 3G-SDI) ruggedized camera

Features

Innovative Approach – The Iron SDI 265 is a low-cost, low-power global shutter CMOS camera with an SDI interface which supports up to 3G-SDI, enabling 2k video at rates of up to 60fps.

Intelligent Design – This Iron camera incorporates Pregius’s IMX265 global shutter sensor with a 3.45µm pixel size. With a compact outline and low-key design, the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

The KAYA SDI cameras are an excellent choice for a lower-cost, high-quality camera. Our SDI Iron robust cameras are ideally suited for industrial, defense, and aerospace machine vision systems. With dimensions of 44 x 44 x 38 mm and super low power consumption, The Iron SDI 265  ruggedized camera is designed to fit very small places. The wide range of operating temperatures, spanning from -40°C to 80°C, enables it to function under severe environmental conditions. The high resolution of 1080p provides a sensitive, high-quality video output at a high speed that would meet almost any need. Our SDI robust cameras are in use by big industries and manufacturers in virtually any country in the world, as they are suited for an extensive range of purposes.

  • Maximal frame rate of 60 fps
  • Monochrome and Color models
  • Up to 3.2W power at full rate
  • Full image processing feature set
  • Up to 3G-SDI interface
  • C mount / CS mount
  • Full EMVA1288 report
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Wide temperature range
  • Vibration resistant
  • Optional: Bluetooth Controller

Applications

  • Perimeter vision
  • 3D
  • Low light surveillance
  • Special Effects
  • VR

Specifications

 

Pixel Size 3.45 µm
Sensor Pregius IMX265 CMOS Sensor
Video Output 2k, 1080p, 1080i up to 60 fps
Output Interface Single-Link HD-SDI or 3G-SDI
Output Format 10-bit 4:2:2(Y’Cb’Cr’) / RAW (Bayer)
Interface Connector Micro-BNC
Electronic Shutter Global shutter
Monochrome / Color Monochrome / Color
Temporal Noise < 2.2 e- @25°C
Full Well Charge 9828 e-
Dynamic Range > 70.8dB @520nm
Signal-to-Noise Ratio (SNR max) 40 dB @520nm
Quantum Efficiency (QE) X FF  > 63% @525nm
Shortest Exposure 10 µs
Exposure Control Automatic Exposure/Gain, manual Exposure/Gain
Color Control Auto/Manual White balance
LUT
RGB offsets, saturation control
Color correction matrix
Image Enhancement Defect pixel correction
Operational Time Counter
Auto/Manual black level
Binning
Flat field / Fixed patter noise correction
Image flip
Camera Configuration RS232 direct ASCII protocol
Synchronization Tri-level sync input


Mechanical & Electrical

Dimensions (including lens mount) 44 mm x 44 mm x 38.7 mm (Height x Width x Depth)
Lens Mount C-mount, CS-mount, Active EF-mount or DC Auto Iris lenses
Weight (without lens) ~50g
Power Input 11-28V
Power Consumption <3.2W @ 12V DC
Operating Temperature -40°C to 80°C, 20-85% humidity (non-condensing)
Storage Temperature -40°C to 85°C, 10-90% humidity (non-condensing)
Ingress Protection Optional IP67 (with protective lens tube)
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20

 

* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.

SDI Supported Video Modes

HD-SDI

ST 292 (ST 274):

Supported Resolution Supported FPS
1080i 10-bit 4:2:2/RAW 50, 59.94, 60
1080p 10-bit 4:2:2/RAW 23.98, 24, 25, 29.97, 30


ST 292 (ST 2048-2):

Supported Resolution Supported FPS
2K 10-bit 4:2:2/RAW 23.98, 24, 25, 29.97, 30


3G-SDI


ST 425-1 (ST 274):

Supported Resolution Supported FPS
1080p 10-bit 4:2:2/RAW 50, 59.94, 60


ST 425-1 (ST 2048-2):

Supported Resolution Supported FPS
2K 10-bit 4:2:2/RAW 47.95, 48, 50, 59.94, 60

Camera Workflow

QE Tables

Pregius’s IMX265 Mono Spectral Response

Pregius’s IMX265 Color Spectral Response

Gallery