Iron 3GSDI 462

1080p at 60fps Rolling Shutter sensor. Small Form Factor SDI Ruggedized Camera

Features

Innovative Approach – The Iron 3GSDI 462 is an ultra-thin, low-cost, low-power rolling shutter CMOS camera with an SDI interface that supports high-quality video at rates up to 60 fps. With an optional analog video output, this camera is highly versatile, allowing it to fit various tasks and conditions.

Intelligent Design – Our camera incorporates high sensitivity Sony rolling shutter sensor with a 2.9µm pixel size. With an extremely compact outline the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

  • Maximal frame rate of up to 60 fps
  • Up to 2.2W power at full rate
  • Full image processing feature set
  • Up to 3G-SDI interface
  • C, CS or M12 lens mount
  • Rugged industrial grade
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Board level and packaged camera options
  • HD BNC connector for SDI output
  • Optional: analog video output

Applications

  • Perimeter vision
  • Low light surveillance
  • Special Effects
  • Virtual Reality
  • 3D

Specifications

Specifications

Pixel size 2.9 µm x 2.9 µm
Optical format 1/2.8
Sensor Sony IMX 462 Rolling shutter sensor
Video output 2k, 1080p, 1080i up to 60 fps
Output interface Single-Link HD-SDI or 3G-SDI
Optional: Analog Video Output
Interface connector HD BNC (Optional MCX)
Output format 10-bit 4:2:2(Y’Cb’Cr’)
Electronic shutter Rolling shutter
Monochrome / Color Color
Temporal noise 2.8e- at Gain 1
Full well charge 10500e- at Gain 1
Quantum efficiency 80% @520nm
Dynamic range > 70.4dB
Signal-to-noise ratio (SNR max) > 40.2 dB
Shortest exposure 14 µs
Exposure control Automatic Exposure/Gain, manual Exposure/Gain
Image enhancement Defect pixel correction
Operational Time Counter
Auto/Manual black level
Auto/Manual White balance
Image flip
LUT
Defog
RGB offsets, saturation control
Color correction matrix
Camera configuration RS232 direct ASCII protocol
Synchronization Tri-level sync input (supported only for progressive formats)

 

Mechanical & Electrical

Dimensions (including lens mount) 44 mm x 44 mm x 29.15 mm (Height x Width x Depth)
Lens mount C-mount, CS-mount or M12-mount
Weight ~55g enclosed, 14g board level
Power input 5-28V
Power consumption 2.4W Typical (@ 12V DC, 25°C)
3.4W Maximum (@ 28V DC, 80°C)
Operating temperature -40°C to 80°C, 20-85% humidity (non-condensing)
Storage temperature -40°C to 85°C, 20-85% humidity (non-condensing)
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20
Ingress protection Optional IP67 (with protective lens tube)

* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.

SDI Supported Video Modes

Mode Video Standard Supported Resolution Supported FPS
HD-SDI ST 292 (ST 274) 1080i 10-bit 4:2:2/RAW 50,60, 59, 94
1080p 10-bit 4:2:2/RAW 23.98, 24, 25, 29.97, 30
3G-SDI ST 425-1 (ST 274) 1080p 10-bit 4:2:2/RAW 50, 59.94, 60

Camera Workflow

QE Tables

IMX462 Color Spectral Response

Gallery