Iron CoF 2020E

4 MP at 290 fps Global Shutter sensor. Small Form Factor CoaXPress Over Fiber 12G ruggedized camera


Innovative Approach – The Iron 2020E is a high-speed, low-cost, low-power global shutter CMOS camera with a CoaXPress over Fiber Bridge 1.0 interface (via a SFP+ module) which supports 4 MP high quality video at rates of up to 290fps.

Intelligent DesignThe Iron 2020e is a global shutter camera with a 6.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

  • 4 Megapixel up to 290 fps
  • Up to 4.5W power at full rate
  • Full image processing feature set
  • CoaXPress over Fiber Bridge 1.0
  • C or CS lens mounts available
  • Full EMVA1288 report
  • Full built-in self-test (BIT)
  • Full built-in voltage testing
  • Customization as per user requirements
  • Wide temperature range
  • Vibration resistant


  •  Perimeter vision
  • Low light surveillance
  • Special Effects
  • Virtual Reality



Pixel Size 6.5 µm x 6.5 µm
Resolution 2048 (H) x 2048 (V)
Sensor Size 13.3 mm x 13.3 mm | 1.2”
Sensor Gpixel GSENSE2020e
Output Interface CoaXPress over Fiber Bridge 1.0
Interface connector Fiber optic SFP+ module
Supported SFP+ Modules Single-mode 1310nm
Multi-mode 850nm
Bidirectional single-mode (single fiber)
Output Resolution 10 bit, 8 bit
Max Frame Rate 290 fps @ 8 bit
230 fps @ 10 bit
Image acquisition Continuous / Triggered
Camera Control Gen<i>Cam
Electronic shutter Global shutter
Monochrome/ color Monochrome
Temporal noise <6.2 e
Full well charge 19 ke
Dynamic range > 70dB
Signal-to-Noise Ratio (SNR max) 41.5dB
Quantum efficiency (QE) X FF <72% @595nm
Shortest Exposure 2.6 µs
On camera processing Defect pixel correction
Frame counter
Flat field / Fixed patter noise correction
Auto/Manual black level
Auto Exposure/Gain
Auto/Manual White balance
Image flip
Gain (Analog / Digital)
Operational Time Counter
GPIO connection Two inputs, two outputs, external trigger & strobe controller

Mechanical & Electrical


Dimensions [1] 46 mm x 48 mm x 90.4 mm (Height x Width x Depth)
Weight (without lens) <100g
Typical current <190mA @ 24V
Operating Temperature -40°C to 80°C, 20-85% humidity (non-condensing)
Storage Temperature -40°C to 85°C, 20-85% humidity (non-condensing)
Operational Shock Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20
Ingress Protection Optional IP67 (with protective lens tube)
Lens Mount C-mount / CS-mount
Power Input PoCXP full support (11-28V with external power option)
Power Consumption <4.5W @ 24V DC

* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.

1.  Dimensions are subject to change

Camera Workflow

*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.

QE Tables

Gsense2020e spectral response

Gsense2020e camera spectral response